15
Adjusting Rinse Aid Dosing
3
As the dishes are washed rinse aid is
released from the dispenser into the wash
water. The dose is factory set at 4, and can
be adjusted from 1 to 6. Only change the set-
ting if streaks, milky spots or dried on water
marks are visible on glasses or crockery.
1. Open the door of the dishwasher.
2. Press the rinse aid compartment release button
with your finger.
3. Fully open the rinse aid compartment lid.
4. Set the dose level.
5. Close the lid and press until it locks into place.
6. If rinse aid has run out, wipe up with a cloth.
To Next Page
Loading...
Need help?
General
