Operating instructions
21
The cutlery basket
Long bladed knives stored in an upright position are a potential
hazard.
Long and/or sharp items of cutlery such as carving knives must be
positioned horizontally in the upper basket.
Take care when loading or unloading sharp items such as knives.
Forks and spoons should be placed in the removable cutlery basket
with the handles facing downwards and the knives with their handles
facing upwards.
If the handles protrude from the bottom of the basket, obstructing the
lower spray arm, load the cutlery with the handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking together.
For best results we recommend you to use
the cutlery grids provided (if the size and
dimensions of the cutlery allow it).
To make the removal of cutlery easier it is possible to open the cutlery
basket.
To ensure that the cutlery basket cannot open when removed from the
appliance always hold both parts of the two part handle.
1. Place the cutlery basket on a table or work surface.
2. Open the two part handle.
3. Remove the cutlery.
4. Close the two part handle.
To Next Page
Loading...
Need help?
General
