Operating instructions
29
The opening of the door during the countdown will not modify the
delay start.
Once the delay start has elapsed the programme will start
automatically.
Note: it is possible to select a washing programme and the delay
start also with the door slightly opened.
In this case the start of the programme or of the countdown
will occur after the closure of the door. Until that moment it is
possible to modify the set made.
6. To interrupt or cancel a washing programme
in progress
Interrupt or cancel a washing programme in progress
ONLY if it’s absolutely necessary
Attention! Hot steam may escape when the door is opened.
Open the door carefully.
Interrupt a washing programme in progress
a)Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the point at which
it was interrupted.
b)Press the On/Off button, in this case all the indicator lights
turn off. Press the On/Off button again; the programme will start
from the point at which it was interrupted.
Cancel a washing programme in progress
To cancel a washing programme you have to reset the dishwasher;
press simultaneously function buttons 2 and 3 for about 2 seconds.
After about 2 seconds all the indicator lights will turn off (except
for the On/Off indicator light and eventually the rinse aid and salt
indicator lights) indicating that the running programme has been
cancelled.
If a new washing programme is to be selected, check that there is
detergent in the detergent dispenser.
To Next Page
Loading...
Need help?
General
