Operating instructions
28
Starting a washing programme
1. Check that the baskets have been loaded
correctly and that the spray arms can rotate
freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off button
The On/Off indicator light illuminates.
5. Setting and starting the programme
To select a programme, press the button of the programme you
wish to select, (see "Washing programmes" chart), the indicator
light of the button illuminates and in the digital display will appear,
flashing, the running time of the programme that has been set
(in minutes).
After about 3 seconds from the last pressure of a button the
programme starts automatically.
In the digital display the running time of the programme is no
longer flashing.
Setting and starting the programme with the delay start
The setting of the delay start occurs before selecting the
programme
Press the delay start button until the flashing number of the hours
for the delay start will appear in the digital display (from 1h
to 19h).
Select a washing programme (see "Washing programmes" chart).
In the digital display will appear, for a moment, the running time
of the programme and then again appears the selected delay start
time.
As soon as the number of hours is displayed without flashing, the
countdown for the delay start is active.
The countdown will decrease with steps of 1 hour.
To Next Page
Loading...
Need help?
General
