eltherm ELTC-21 Operation Manual

3
ww w.eltherm.com
Contact us: +49 2736 4413-0 • info@eltherm.com
Operation manual
ELTC-21 & ELTC-22
BU-093
Revision 7
Particularly important points in these instructions are indicated by the following symbols:
RECEIPT OF GOODS
Upon receipt of the goods, check the controllers and acces-
sories and compare the information on the type plate with
the information on the delivery bill to ensure that the correct
material has been delivered.
STORAGE
DISPOSALSCOPE OF DELIVERY
The scope of delivery of the article includes:
INTRODUCTION
Display conventions
ATTENTION
indicates a potentially dangerous situation.
If not avoided, there is a risk of damage or malfunction.
DANGER
indicates an extremely dangerous situation.
If it is not avoided, there is a danger to life or at least a high risk of
serious injury.
WARNING
indicates a potentially dangerous situation.
If it is not avoided, there is a risk of injury or at least a high risk of
damage.
NOTE
important information and instructions for safe, eective and envi-
ronmentally sound use.
i
NOTE
Storage should be in a dry place at an ambient temperature
of -25°C to 60°C.
i
NOTE
The WEEE logo (shown above) indicates that this product
should not be disposed of with other waste.
For more information on disposal and
and recovery of waste electrical and electronic equipment
For more information on the disposal and recovery of waste
electrical and electronic equipment (WEEE) and collection
points, please contact your local waste management com-
pany or the manufacturer from whom you purchased the
product.
i
The electronic temperature controller of the ELTC type series is a controller with digital display for wall mounting. The tempera-
ture measured with a Pt100 temperature sensor is processed and displayed by a microcontroller. After an actual value/
setpoint comparison, the output relays are then switched according to the conguration. Cable glands and terminals are built in
for electrical connection. The device is supplied in a splash-proof plastic housing with a transparent housing cover including ac-
cessories. The temperature controller is also suitable for connection of temperature sensors type ELTF-PTEx in hazardous areas.
Qty. Item
1 Pcs. Temperature controller
1 Pcs. Operation manual DE & EN

eltherm ELTC-21 Specifications

General

Brand	eltherm
Model	ELTC-21
Category	Controller
Language	English