38
GB
Controls and programmes
4) KG DETECTOR INDICATOR
(only used with cotton and
synthetic programmes)
• During the rst few minutes of
the programme the Kg Detector
indicator lights up as the intelligent
sensor weighs the load and adjusts
the wash time, water consumption
and electricity consumption.
• During each stage the “Kg
Detector” monitors the wash
load in the drum and carries out
the following steps in the rst few
minutes:
– adjusts the amount of water that is
needed
– calculates the duration of the wash
cycle
– checks the rinse requirements
based on the chosen fabric type
– adjusts the rotation rhythm based on
the chosen fabric type
– monitors the level of foaming and
increases water ow during rinsing if
necessary
– adjusts the spin speed based on the
wash load to avoid imbalance.
5) BUTTON LOCK INDICATOR
This light indicates when the buttons are
locked.
6) WASH TEMPERATURE
INDICATORS
These show the temperature for the
chosen programme, which can be
changed (if applicable) using the
temperature button. If you want to wash
in cold water, all the lights must be
turned off.
7) SPIN SPEED INDICATORS
These show the spin speed for the
chosen programme, which can be
changed or skipped using the spin speed
button.
To Next Page
Loading...
Need help?
General
