24
EN
PICTURE ADJUSTMENT
You can select from four default picture color set-
tings.You can also adjust brightness, contrast,
color, tint, sharpness and color temperature as well
as energy saving settings.
1
Display the setup screen.
• Press
[SETUP].
The following setup screen appears.
2 Select “PICTURE”, and press [ENTER] to con-
firm.
• Using [
K
/
L
], select your desired item and
press
[ENTER] to confirm.
3 Adjust the picture quality.
• Using
[
K
/
L
], select the picture quality you want
to adjust.
Picture Mode
Using [
K
/
L
], adjust Picture Mode from the
selection, then press
[ENTER]. (Standard,
Dynamic, Movie, News and Manual)
Brightness
Using [
s
/
B
], adjust until the darkest parts of
the picture are as bright as you prefer.
s
:To decrease brightness
B
:To increase brightness
Contrast
Using [
s
/
B
], adjust to increase or decrease
contrast.
s
:To decrease contrast
B
:To increase contrast
Color
Using [
s
/
B
], adjust to be brilliant or pale color.
s
:To pale
B
:To brilliant
Tint
Using [s / B], adjust to obtain natural skin tones.
s
:To red
B
:To green
Sharpness
Using [
s
/
B
], adjust the detail of the picture.
s
:To soft
B
:To clear
Color Temp.
Using [
K
/
L
], adjust Color Temperature from the selec-
tion, then press
[ENTER]. (Cool, Neutral and Warm)
Energy Saving
Using [
s
/
B
], adjust brightness of backlight.
s
:To bright
B
:To dark
• The adjustment bar for picture quality item is
displayed on the screen.
4 To exit the setup, press [SETUP].
NOTE:
• To cancel the picture adjustment, press [SETUP].
To Next Page
Loading...
Need help?
General