11
LISTENING TO THE RADIO
1.) Press the POWER button on the front panel. The main display turns on.
2.) If necessary, press the FUNCTION button on
the top panel to select the Tuner function. The
display will show an AM or FM station
frequency. To select a different band, press
the STOP/BAND button.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the TUNING / buttons on the top panel until the frequency
of the desired station appears on the display.
• Automatic Tuning
Press and hold the TUNING / buttons on the top panel until the display
begins to move, then release the buttons. The tuner will search up or down the
band for the next strong station and stop on that station. Repeat this procedure
until the tuner stops on your desired station.
4.) If you tuned to an FM Stereo station the indicator will appear in the
display. If the reception is noisy or weak, press
the STEREO button on front panel to select
FM Mono mode. The indicator will
disappear. The reception will normally
improve although the sound will no longer be
in stereo.
5.) Adjust the VOLUME / and EQ controls as desired.
6.) When you are finished listening press the POWER button to return to the
Standby (Power Off) mode.
The display shows bye briefly then goes off
and the time display reappears.
PD3500RD_102904.p65 29/10/2004, 15:3611
To Next Page
Loading...
Need help?
General
