Emerson PD3500RD User Manual

20
PROGRAMMED PLAYBACK
You can program up to 32 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is
playing press the STOP/BAND button to stop playback before you begin
the programming steps below.
1.) Press the FUNCTION button to select CD, insert your disc in the player, close
the door, and wait until the total track number appears in the display.
2.) Press the PROG. button once. The
Indicator, program memory “P-01”, and Track
number “00” appear in the display.
3.) Use the / buttons to select the first trackck
to be programmed.
Example: Track 08.
4.) When track number “08” appears in the display, press the PROG. button
once again to enter the track “08” in program
memory number “01”. The track number
returns to “00” and the program memory
advances to “P-02” indicating that you may
now select a track to be entered in program
memory number “02”.
5.) Use the SKIP or buttons to select the next track to be programmed.
When the desired track number appears in the display press the PROG.
button again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 32 tracks in the program memory.
PD3500RD_102904.p65 29/10/2004, 15:3620

Emerson PD3500RD Specifications

General

Brand	Emerson
Model	PD3500RD
Category	CD Player
Language	English