Emerson QuickPanel+ IC755C S12CD Series Quick Start Guide

Quick Start Guide Section 5
GFK-2893P Aug 2019
Product Certification & Installation Guidelines 33
5. Product Certifications and
Installation Guidelines for
Conformance
The Quick Panel
+
Operator Interface is intended for use
in industrial environments and, when properly installed,
shall comply with the following agency approvals.
5.1 Agency Approvals
Note: The agency approvals listed in the following table and on
the Declaration of Conformities are believed to be accurate.
However, the product’s agency approvals should be verified by
the marking on the unit itself.
Description
Agency
Marking
Comments
N.A. Safety for
Programmable
Controller for use
in Hazardous
locations
Class I Division 2
Groups A, B, C, D
(applicable to
7'',10'',12'', 15''
Display units)
Class I Division 2
Groups A, B, C, D;
Class 2 Division 2
Groups F, G; Class
3 Division 1 and
Division 2
(applicable only to
6'' Display unit)
Certification by
Underwriter's
Laboratories (UL) to
UL 61010-1;
UL 61010-2-201;
CSA C22.2 No 142–
1987; CSA 61010-1;
CSA 61010-2-201
ISA 12.12.01 standard
and CSA C22.2 No
213-M1987

Emerson QuickPanel+ IC755C S12CD Series Specifications

General

Brand	Emerson
Model	QuickPanel+ IC755C S12CD Series
Category	Monitor
Language	English