3 Ordering information
3.1 Parts list
Table 3-1: Helium to Hydrogen Conversion Kit (P/N 2-3-0500-186)
Part number Description Required Units
2-3-0500-521 Kit, 9k thermistors 1 Each
2-4-4000-119 Bulkhead union ⅛-in. stainless steel 1 Each
2-4-4000-190 Valve carrier shut-off 1 Each
2-4-5000-058 Tee, tube fitting ⅛-in. 2 Each
2-4-9202-608 M/S SLT button head screw stainless steel 6-32 x 1-in. 4 Each
2-4-9202-908 M/S SLT button head screw stainless steel 10-32 x
1-in.
2 Each
2-4-9221-110 Kep nut 6-32 stainless steel 4 Each
2-4-9221-160 Kep nut 10-32 stainless steel 6 Each
2-4-9500-001 Tubing nut 1/16-in. stainless steel, male 3 Each
2-4-9500-005 Ferrule 1/16-in. rear 4 Each
2-4-9500-006 Ferrule 1/16-in. front 4 Each
2-4-9500-012 CON male ⅛ T x ⅛ NP 1 Each
2-4-9500-021 Tubing 1/16-in. female stainless steel 1 Each
2-4-9500-329 Tubing Peek 1/16-in. ODX .0035 ID .0035/.0 10 Feet
2-6-5000-152 Tag Hydrogen In SK-3983 1 Each
2-6-5000-160 Tag Valve Actuation Gas 1 Each
2-6-5000-485 Tubing 316 stainless steel 1/16 OD x .043 5 Feet
2-4-5001-977 Regulator, Carrier, 10-100 Out 1 Each
2-4-5001-995 Gauge 0-100 psi/bar, panel mount 1 Each
2-6-5000-487 Tubing ⅛ OD x.085 ID 31 3 Feet
2-6-5000-821 Tag RV 1 Each
Retrofit Instructions Ordering information
SK-07781 September 2019
Rosemount Model 500 Helium to Hydrogen Gas Conversion Kit 23
To Next Page
Loading...
