IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions for PowerSafe
®
mP Lead-Acid Battery Systems
that should be followed during the installation and maintenance of the battery system.
Only a qualified EnerSys
®
service representative or others who are knowledgeable in batteries
and the required precautions should perform servicing of the batteries. Keep unauthorized
personnel away from batteries.
Misuse of this equipment could result in human injury and
equipment damage. In no event will EnerSys be responsible
or liable for either indirect or consequential damage or injury
that may result from the use of this equipment.
Do not dispose of the batteries in a fire.
Do not open or mutilate the batteries. Released electrolyte is
harmful to the eyes and skin and may also be toxic.
This unit contains sealed lead acid batteries. Lack of
preventative maintenance could result in batteries exploding
and emitting gasses and/or flame. An authorized, trained
technician must perform annual preventative maintenance.
Failure to replace a battery before it reaches end of life may
cause the case to crack, possibly releasing electrolyte from
inside the battery and resulting in secondary faults such as
odor, corrosion, smoke and fire.
Installation and servicing of batteries should be performed by
personnel knowledgeable about batteries and the required
precautions. Keep unauthorized personnel away from the
batteries.
Proper maintenance to the battery system of this unit must
be done by a qualified service technician. This is essential to
the safety and reliability of your system.
Risk of fire, explosion, or burns. Do not disassemble, heat
above 60°C (140°F), or incinerate.
iii
www.enersys.com
Publication No. US-MP-OM-001
March 2017
CAUTION
CAUTION
CAUTION
WARNING
WARNING
WARNING
WARNING
WARNING
To Next Page
Loading...
Need help?
General
