Entrust Sigma DS1 Installation And Administrator's Guide

Sigma DS1, DS2, and DS3 Card Printers Installation and Administrator’s Guide 51
Color Print Ribbon Kits
The following color print ribbon kits are available. Not all ribbons are available in both roll and
cassette formats, and the yield varies depending on the ribbon type. Contact your authorized
dealer for complete information when ordering ribbons.
 YMCKT Color Ribbon
 YMCKT-KT Color Ribbon
 ymcKT (short-panel) Color Ribbon
 ymcKT-KT (short-panel) Color Ribbon
 YMCK Color Ribbon (used with laminating systems only)
 YMCK-K Color Ribbon (used with laminating systems only)
 YMCKF-KT Color Ribbon with UV (used with laminating systems)
 YMCKL-KT Color ribbon (used with laminating systems)
Monochrome Print Ribbon
A monochrome ribbon prints the entire card in one color.
Monochrome ribbon can be:
 Alternating black and topcoat panels (KT or KTT ribbon)
 Continuous black (K ribbon)
 A continuous color, such as red or silver
Monochrome Print Ribbon Kits
The following monochrome print ribbon kits are available:
 Alternating black and topcoat panels (KT ribbon)
 Black with two topcoat panels (KTT ribbon)
The printer applies black and two topcoat panels on the same side
of the card.
When the YMCKF-KT and YMCKL-KT ribbons are used in a YMCKFT or YMCKLT
panel configuration, they do not require a laminator, since the topcoat (T) panel
provides protection for the color printing.
The KTT ribbon type is not supported in OpenCard-enabled systems. It uses only
one T panel, instead of both.
KT Ribbon
KTT Ribbon

Entrust Sigma DS1 Specifications

General

Brand	Entrust
Model	Sigma DS1
Category	Printer
Language	English