Safety and operating instructions
© Construction Tools GmbH | 33905146 01 | 2019-09-05
Original Instructions
21
4 Transport
WARNING Hoist tipping over / hydraulic attach-
ment falling
The hydraulic attachment is heavy. The hoist/lifting
equipment and/or hydraulic attachment tipping over or
falling may cause serious injury and material damage.
u Only transport the hydraulic attachment with lifting
equipment with the right load-bearing capacity for the
weight of the hydraulic attachment.
u Only lift and secure the hydraulic attachment with lift-
ing gear (ropes, chains, shackles etc.) with the right
load-bearing capacity for the weight to be lifted.
u Make sure that there is nobody near or under the
suspended hydraulic attachment.
WARNING Percussion unit falling
The percussion unit slides out of the breaker box if not
secured by the adapter plate or the transport safety de-
vice. The falling percussion unit may cause serious in-
jury and material damage.
u Never transport a hydraulic breaker without mounted
adapter plate or transport safety device.
u Immediately mount the transport safety device after
removal of the adapter plate.
u The percussion unit must not move in the breaker
box even if the transport safety device is mounted. A
sliding percussion unit can destroy the transport
safety device.
u Replace a missing elastic pad, if necessary e.g. with
a wooden block. This keeps the percussion unit fixed
in the breaker box during transport.
u Immediately replace a defective transport safety de-
vice. Use the spare parts list to order a new transport
safety device. If not in use save the transport safety
device for future use.
WARNING Hydraulic breaker falling
The lifting eye may fail and cause the hydraulic breaker
to fall. This may cause serious injury and material dam-
age.
u Check the lifting eye before you lift the hydraulic
breaker. Never lift the hydraulic breaker with the lift-
ing eye if:
● the checkpoints(A) are worn and not protruding
anymore
or
● the checkpoints(B) are worn and not recessed
anymore.
● the material is worn up to the checkpoints (A, B).
Use permitted
Use prohibited
● the lifting eye is bent.
● you detect cracks in the lifting eye or the weld
seam.
u Contact the authorized Customer Center / Dealer in
your area if the lifting eye is worn in any way.
To Next Page
Loading...
Need help?
General
