Episode EA-RSP-16D-100 User Manual (English)

To Next Page

To Previous Page

page | 13

To set POWER MODE to Audio Sense:

1. Using the browser user interface, set POWER MODE to Audio Sense.

Note: In this mode, the amplifier can be turned on when audio is sensed or when an IP/IR command is

received. Front-panel power button presses are ignored. The amplifier automatically goes into Standby if no

audio is sensed for 15 minutes (default). However, this time setting can be changed or Standby mode can

be disabled. If Standby is disabled, the amplifier turns off only when an IP or IR power command is received.

See “Standby Settings” below for more information.

Note: The Standby wakeup time varies based on the selected Power Mode and amplifier model. See the

Specifications section at the end of this guide for details.

STANDBY SETTINGS

This setting determines the time it takes for the amplifier to go into Standby after no audio has been sensed.

To set Standby mode:

1. Using the browser user interface, set Standby to one of four options: 15 minutes, 1 hour, 3 hours, or Never.

Selecting Never disables Standby, ensuring that the amplifier remains on until an IP or IR power command is

received.

Brand

Model

EA-RSP-16D-100

Episode EA-RSP-16D-100 User Manual