Projector Parts and Functions
10
Projector Parts - Top/Side
Name Function
A
Obstacle sensors Detects obstacles that are interfering with the
projection area and reduces the brightness of the light
source for safety.
Name Function
B
Motion sensor Detects movement near the projection window and
reduces the brightness of the light source for safety.
a
• The detection range may vary
depending on the temperature of
the surroundings.
• Movement may not be detected
through transparent material such
as glass.
C
Projection window Images are projected from the lens inside the projector.
Warning
• Do not look into the projection window
while projecting.
• Do not place any objects or put your hand
near the projection window. It could cause
burns, fire, or the object to warp because this
area reaches a high temperature due to the
concentrated projection light.
D
Status indicator Indicates the projector's status.
E
Power button Turns the projector on or off.
F
Focus lever Adjusts the image focus.
G
Side cover latch Slide to remove the side cover.
H
Air exhaust vent Exhaust vent for air used to cool the projector
internally.
Caution
While projecting, do not put your face or
hands near the air exhaust vent, and do not
place objects that may become warped or
damaged by heat near the vent. Hot air from
the air exhaust vent could cause burns,
warping, or accidents to occur.