53
EMP-S1 User’s Guide
Appendices
Projector Care
Cleaning
You should clean the projector if it becomes dirty or if the projected
image starts to deteriorate.
f Cleaning the projector case
Clean the projector case by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water
containing a small amount of (ph) neutral detergent, and then firmly wring
the cloth dry before using it to wipe the projector case. After you have
done this, wipe the projector another time with a soft, dry cloth.
f Cleaning the lens
Use a commercially-available air blower, or lens cleaning paper to gently
wipe the lens.
c
Be sure to read the separate "Safety Instructions/World-Wide
Warranty Terms" before proceeding.
c
Do not use volatile substances such as wax, alcohol or thinner to
clean the projector case. These can cause the case to warp and
make the surface coating peel off.
c
As the lens can be easily damaged, do not rub the lens with
harsh materials or subject the lens to shocks.
To Next Page
Loading...
Need help?
General
