101
Product Light Status
You can often diagnose problems with your product by checking its lights.
1
power light
2 ink light
3
paper light
Light status Condition/solution
The power light is on
The product is turned on.
The power light is flashing The product is busy. Wait for the power light to stop flashing before
turning off the product.
The ink light is on Initial ink charging may not be complete. See the Start Here sheet for
instructions.
The paper light is on
No paper is loaded or multiple sheets fed at one time. Load paper in the
product, and press the stop button to clear the error.
The paper light is flashing
Paper is jammed in the product. Remove the jammed paper, and press
the stop button to clear the error. If the paper light is still flashing,
turn the product off and then back on again. If the error continues, load
letter- or A4-size paper in the rear paper feed, and then press the
stop button to remove the paper inside. If the error cannot be
cleared, contact Epson for support.
To Next Page
Loading...
Need help?
General
