EasyManuals Logo
Home>Epson>Printer>L6460 Series

Epson L6460 Series User Manual

Epson L6460 Series
303 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #280 background imageLoading...
Page #280 background image
Related Information
& “Changing the Network Connection from Wi-Fi to Ethernet” on page 220
Connecting to the Wireless LAN (Wi-Fi)
You can connect the printer to the wireless LAN (Wi-Fi) in several ways. Choose the connection method that
matches the environment and conditions that you are using.
If you know the information for the wireless router such as SSID and password, you can make settings manually.
If the wireless router supports WPS, you can make settings by using push button setup.
Aer connecting the printer to the network, connect to the printer from the device that you want to use (computer,
smart device, tablet, and so on.)
Related Information
& “Making Wi-Fi Settings by Entering the SSID and Password” on page 222
& “Making Wi-Fi Settings by Push Button Setup (WPS)” on page 223
& “Making Wi-Fi Settings by PIN Code Setup (WPS)” on page 224
Settings to Use the Printer
Making Contacts Available
Registering a contacts list allows you to easily enter destinations. You can register up to 100 entries, and you can
use the contacts list when you enter a fax number. is feature is available only for ET-5170 Series/L6490 Series.
Registering or Editing Contacts
1.
Select Fax on the home screen.
2.
Select Contacts.
3.
Do one of the following.
To register a new contact, select Add Entry, and then select Add Contact.
To edit a contact, select
on the target contact, and then select Edit.
To delete a contact, select
on the target contact, and then select Delete, and then select Ye s . You do not
have to perform following procedures.
4.
Make the necessary settings.
Note:
When entering a fax number, enter an external access code at the beginning of the fax number if your phone system is
PBX and you need the access code to get an outside line. If the access code has been set in the Line Type setting, enter a
hash (#) instead of the actual access code. To add a pause (pause for three seconds) during dialing, enter a hyphen (-).
5.
Select OK.
Administrator Information
>
Settings to Use the Printer
>
Making Contacts Available
280

Table of Contents

Questions and Answers:

Epson L6460 Series Specifications

General IconGeneral
BrandEpson
ModelL6460 Series
CategoryPrinter
LanguageEnglish

Related product manuals