M200 / M205 / M100 / M105 Series Revision A
Disassembly/Reassembly Detailed Disassembly/Reassembly Procedure for each Part/Unit 54
Confidential
Ink Supply Tank Tube Assy
When connecting the Ink Supply Tank Tube Assy to the Ink
Supply Tank, insert the tube to the full and make sure the gap
between the end of tube and the tank is 0.5 mm long or less.
Make sure there are no twists.
Ink Supply Tank Tube Assy
Ink Supply Tank
0.5 mm or less
Valve Lever
Before removing the Valve Lever, release the hook on it with a
precision screwdriver or the like.
Valve Lever
Valve Lever
Hook
Flathead precision
screwdriver
Ink Supply
Tank Assy
Joint
When connecting the Ink Supply Tube to the joint, align the red line on the Ink Supply Tube to the protrusion on the side of the joint with a cutout.
When attaching the Joint, align the cutout of the Joint with the rib of the Ink Supply Tube Guide 2nd.
Make sure the gap between the end of Ink Supply Tank Tube Assy or Ink Supply Tube and the Joint is 0.5 mm long or less.
Joint Protrusion
Cutout Rib
Red line
0.5 mm or less
Ink Supply Tube Ink Supply Tank Tube
Joint
0.5 mm or less
Joint
Cutout
Joint
Ink Supply Tube
Ink Supply Tank Tube
Adapter
Be careful not to damage or peel off the film of the Adapter.
Use a precision screwdriver when releasing the hook of the
Adapter.
Install the Ink Supply Tube to the adapter with its red line facing
the right side of the adapter.
Connection of Ink Supply Tubes
Hook
Ink Supply Tube
Adapter
Film
Hook
AdapterInk Supply Tube
Red line
Ink Supply Tank
Be careful not to damage or peel off the film of the Ink Supply
Tank.
Be careful about how to place the Ink Supply Tank Assy in
order to prevent printing failure from occurring. (See
"HOW
TO PLACE THE INK TANK ASSY WHEN DISASSEMBLING/
REASSEMBLING (p26)"
)
Ink Supply Tank
Rear
Film
Film
Valve Position Label / Tank Caution Label
Apply the Valve Position Label without any floating parts or tilt while aligning the label with the standard line on the Housing Ink Supply Tank
shown above.
Do not apply the Tank Caution Label over the textured section.
Housing Ink Supply Tank
Standard line
Valve Position Label
Front side
Ink Supply Tank Cover
Textured section
Tank Caution Label
Housing Ink Supply Tank
Right side
Standard line
Valve Position Label
To Next Page
Loading...
Need help?
General