9
Chapter 2 Installation
2
Installation
This chapter explains the procedures for installing and uninstalling the TM-T70II printer driver.
Installing the Printer Driver
Installing
1
Connect the printer to the computer with an interface cable, load paper, and then turn on
the printer.
If you are on an Ethernet/wireless connection, connect to the network and then turn on the printer power.
2
Click TM-T70II_xxx.dmg in the location where you saved it. Double-click TM-
T70II_xxx.pkg to start the installer.
3
The "Welcome to the TM-T70II Mac Printer Driver Installer" screen appears. Click the
"Continue" button.
The screens of Mac OS X 10.6 are shown in this chapter. If you are using a different version
of Mac OS, proceed as appropriate for the screens in your version.
Close [Print & Fax] in [System Preferences] before installing or uninstalling the printer driver.
While settings are being saved, do not turn off the printer power or disconnect the printer.
To install or uninstall the print driver, an administrator “Name” and “Password” is necessary.
To Next Page
Loading...
Need help?
General
