EasyManuals Logo
Home>Epson>Projector>VS230

Epson VS230 User Guide

Epson VS230
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
Maintaining and Transporting the Projector
Follow the instructions in these sections to maintain your projector and transport it from place to place.
Projector Maintenance
Transporting the Projector
Projector Maintenance
Your projector needs little maintenance to keep working at its best.
You may need to clean the lens periodically, and clean the air filter and air vents to prevent the projector
from overheating due to blocked ventilation.
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part
needs replacing, contact Epson or an authorized Epson servicer.
Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open
any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages
in the projector can injure you severely.
Warning: Do not try to service this product yourself, except as specifically explained in this manual.
Refer all other servicing to qualified servicers.
Cleaning the Lens
Cleaning the Projector Case
Air Filter and Vent Maintenance
Projector Lamp Maintenance
Replacing the Remote Control Batteries
Parent topic: Maintaining and Transporting the Projector
Related references
Where to Get Help
Cleaning the Lens
Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.
To remove dust or smudges, gently wipe the lens with lens-cleaning paper.

Table of Contents

Other manuals for Epson VS230

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson VS230 and is the answer not in the manual?

Epson VS230 Specifications

General IconGeneral
Matrix type3-panel (p-Si TFT active)
Number of colors1.073 billion colors
Native aspect ratio4:3
Projection distance0.75 - 8.89 m
Projection technology3LCD
Contrast ratio (typical)10000:1
Screen size compatibility30 - 350 \
Projection distance (tele)8.89 - 8.89 m
Projection distance (wide)0.75 - 0.75 m
Projector native resolutionSVGA (800x600)
Keystone correction, vertical-30 - 30 °
FocusManual
Throw ratio1.45 - 1.96:1
Focal length range16.77 - 16.77 mm
Aperture range (F-F)1.44 - 1.44
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source5000 h
Service life of light source (economic mode)6000 h
Full HDNo
HD-ReadyYes
Video processing10 bit
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA)
USB 2.0 ports quantity2
Component video (YPbPr/YCbCr) in0
HDCP-
Noise level37 dB
Noise level (economic mode)29 dB
RMS rated power2 W
PlacementDesktop, Ceiling
Product typeLarge venue projector
Product colorBlack, White
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Power consumption (typical)283 W
Power consumption (economy mode)207 W
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Depth228.6 mm
Width294.64 mm
Height76.2 mm
Weight2313.32 g

Related product manuals