Error Code What You Can Do
091-441 The printer has exceeded its service life or the settings have been changed to continue using it. The
quality of printouts will degrade if the printer continues to be used.
See Also:
“Machine Life” on page 157
092-651 Turn off the printer, and then on. If this does not solve the problem, contact our local representative office
or authorized dealer.
See Also:
“Contacting Epson Support” on page 221
092-661
116-314 Turn off the printer, and then on. If this does not solve the problem, contact our local representative office
or authorized dealer.
See Also:
“Contacting Epson Support” on page 221
116-355
116-720 Press the
button to cancel the current job. Retry when the printer does not process any job.
124-333 Turn off the printer, and then on. If this does not solve the problem, contact our local representative office
or authorized dealer.
See Also:
“Contacting Epson Support” on page 221
191-310 Although the service life of your printer has been over and the printer stopped running, you can still use
the printer by pressing the
(Back) button and the button at the same time. However, continuous
use of the printer will degrade the print quality.
See Also:
“Machine Life” on page 157
Note:
As for the following message, which does not include an error code, refer to the table below for the
solution.
Error Message What You Can Do
Load Paper
Press OK
AAAA
BBBB
AAAA: Paper Size
BBBB: Paper Type
Check and clear the paper path, load the paper, and then press the
button to
clear the message.
See Also:
“Clearing Paper Jams From the Front of the Printer” on page 177
AL-M200 Series User’s Guide
Troubleshooting 202