EVS XT-3 Technical Reference

6.2.5. CODConnectivity in SLSM 2Ph Single Link
3G-SDI
Connector Assignments
This section describes the connector assignments and layout for the SLSM 2-phase
cameras in Single Link 3G-SDI mode.
Connector SLSM 2-Phase 3G Mode Connector label
J1 N/A CHAR SD
J2 SDI program output (HD) Not wired to the
backplane.
Used for onboard
multiviewer input
J3 SDI program output of phase 1
(HD/SD)
OUT B
J4 SDI monitoring output in SLSM
(HD/SD)
CHAR OUT
SD/HD
J5 Not installed IN B
J6 HD program output of phase 1
(identical to J7)
OUT
J7 HD program output of phase 1
(identical to J6)
OUT
J8 3G-SDI SLSM 2Ph input
(3G)
IN
J9 Alternate 3G-SDI SLSM 2Ph input
(3G, for internal loop)
Not wired to the
backplane.
J9 of REC1 only
connected to Loop
connector.
Note
The loops of the input signal are not genlocked.
HARDWARE TECHNICAL REFERENCE MANUAL XT3 Server 11.02
6. Boards Description 83

EVS XT-3 Specifications

General

Brand	EVS
Model	XT-3
Category	Server
Language	English