Exibel BNX100 User Manual

6
English
3. Adjust thevolume level on thespeaker or theexternal device.
Note: Thetrack can be changed using thebuttons on thespeaker once theexternal
device is connected via the3.5mm socket.
Connecting a Bluetooth device using NFC
(Near Field Communication)
Note: This feature is only available if your Bluetooth device is NFC-enabled.
1. Switch on thespeaker.
2. Activate NFC and Bluetooth on your Bluetooth device.
3. Hold thedevice up to theNFC zone (4) on thespeaker.
4. Your Bluetooth device will ask if you wish to connect to thespeaker.
5. Answer Yes and check theplayback via thespeaker and your Bluetooth device.
Switching the speaker off
Hold in [ ] for 3 seconds, theLED indicator (8) will go out and thespeaker will emit
anaudible “Power Off” message.
Incoming calls
If you receive acall whilst your phone is connected to thespeaker via Bluetooth:
• Press [
] once to answer and use themicrophone in thespeaker.
• Press [
] once to end thecall.
• Hold in [
] for 2 seconds to reject thecall.
Care and maintenance
• Thespeaker has aningress protection rating of IPX4 which means that it can
withstand being splashed with water from all directions. This means that thespeaker
should survive light rain showers and damp conditions. Thespeaker is however, not
waterproof and should not be subjected to jets of water or immersion into water
or other liquid.
• Clean thespeaker using alightly moistened cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
• If thespeaker is not to be used for along time, thebattery should be fully charged
on aregular basis (every second month) to prolong its capacity.

Exibel BNX100 Specifications

General

Brand	Exibel
Model	BNX100
Category	Speakers
Language	English