Fairland TurboSilence InverX IXCR26 User Manual

FOR INSTALLERS AND
PROFESSIONALS
2.3. Trial after installation
Please check all the wirings carefully before turning on the heat pump.
2.3.1．Inspection before use

Check installation of the whole heat pump and the pipe connections according to the pipe
connecting drawing;

Check the electric wiring according to the electrical wiring diagram and earthing connection;

Make sure that the main power is well connected;

Check if there is any obstacle in front of the air inlet and outlet of the heat pump
2.3.2．Trial
 The user is
advised to start the water pump before the heat pump, and turn off the heat pump
before the water pump for long life circle.

The user should start the water pump, and check for any leakage of water; Power on and press
the ON/OFF button of the heat pump, an

In order to protect the heat pump, the heat pump is equipped with start
starting the heat pump, the fan will start to run in 3 minutes, in another30 seconds, the
compressor will start to run.

After pool heat pump starts up, check for any abnormal noise from the heat pump.

Check the temperature setting
2.4. Maintenance and winterizing
2.4.1 Maintenance
The maintenance should be carried out once per year by qualified professional technici
 Cut off power supply of the
heat pump before cleaning,
examination and repairing .
Do not touch the electronic
components until the LED
indication lights on
PCB turn off.

Please clean the evaporator with household detergents or clean water, NEVER
thinners or any similar fuel.

Check bolts, cables and connections regularly.
2.4.2 Winterizing
In winter season when you don’t swim, please cut off power supply and drain water out of the heat
pump. When using the heat pum ℃
14
PROFESSIONALS
Please check all the wirings carefully before turning on the heat pump.
Check installation of the whole heat pump and the pipe connections according to the pipe
Check the electric wiring according to the electrical wiring diagram and earthing connection;
Make sure that the main power is well connected;
Check if there is any obstacle in front of the air inlet and outlet of the heat pump
advised to start the water pump before the heat pump, and turn off the heat pump
before the water pump for long life circle.
The user should start the water pump, and check for any leakage of water; Power on and press
the ON/OFF button of the heat pump, an
d set desired temperature in
the thermostat
In order to protect the heat pump, the heat pump is equipped with start
starting the heat pump, the fan will start to run in 3 minutes, in another30 seconds, the
After pool heat pump starts up, check for any abnormal noise from the heat pump.
.
2.4. Maintenance and winterizing
The maintenance should be carried out once per year by qualified professional technici
PCB turn off.
Please clean the evaporator with household detergents or clean water, NEVER
Check bolts, cables and connections regularly.
In winter season when you don’t swim, please cut off power supply and drain water out of the heat
mp under 2 , make ℃
sure there is always water flow.
Important:
Unscrew the water union of inlet pipe
to let the water flow out.
When the water in machine freezes in
winter season, the titanium heat
exchanger may be damaged.
Please check all the wirings carefully before turning on the heat pump.
Check installation of the whole heat pump and the pipe connections according to the pipe
Check the electric wiring according to the electrical wiring diagram and earthing connection;
Check if there is any obstacle in front of the air inlet and outlet of the heat pump
advised to start the water pump before the heat pump, and turn off the heat pump
The user should start the water pump, and check for any leakage of water; Power on and press
the thermostat
.
In order to protect the heat pump, the heat pump is equipped with start
delay function. When
starting the heat pump, the fan will start to run in 3 minutes, in another30 seconds, the
After pool heat pump starts up, check for any abnormal noise from the heat pump.
The maintenance should be carried out once per year by qualified professional technici
an.
Please clean the evaporator with household detergents or clean water, NEVER
use gasoline,
In winter season when you don’t swim, please cut off power supply and drain water out of the heat
sure there is always water flow.
Unscrew the water union of inlet pipe
When the water in machine freezes in
winter season, the titanium heat

Fairland TurboSilence InverX IXCR26 Specifications

General

Brand	Fairland
Model	TurboSilence InverX IXCR26
Category	Heat Pump
Language	English