Fairland TurboSilence InverX IXCR26 User Manual

FOR INSTALLERS AND
PROFESSIONALS
3. TROUBLE SHOOTING
FAILURE
Heat pump doesn’t run
No power
Power switch is off
Fuse burned
The breaker is off
Fan running but with
insufficient heating
evaporator blocked
Air outlet blocked
3 minutes start delay
Display normal, but no
heating
Set temp. too low
3 minutes
If above solutions don’t work, please contact your installer with detailed information and your model number.
Don’t try to repair it yourself.
ATTENTION
！
Please don’t try to repair the heat pump by yourself to avoid any risk.
15
PROFESSIONALS
3. TROUBLE SHOOTING
FOR
COMMON FAULTS
REASON
SOLUTION
No power
Wait until the power recovers
Power switch is off
Switch on the power
Fuse burned
Check and change the fuse
The breaker is off
Check and turn on the breaker
evaporator blocked
Remove the obstacles
Air outlet blocked
Remove the obstacles
3 minutes start delay
Wait patiently
Set temp. too low
Set proper heating temp.
3 minutes
start delay Wait patiently
If above solutions don’t work, please contact your installer with detailed information and your model number.
Please don’t try to repair the heat pump by yourself to avoid any risk.
COMMON FAULTS
SOLUTION
Wait until the power recovers
Switch on the power
Check and change the fuse
Check and turn on the breaker
Remove the obstacles
Remove the obstacles
Set proper heating temp.
If above solutions don’t work, please contact your installer with detailed information and your model number.
Please don’t try to repair the heat pump by yourself to avoid any risk.

Fairland TurboSilence InverX IXCR26 Specifications

General

Brand	Fairland
Model	TurboSilence InverX IXCR26
Category	Heat Pump
Language	English