02-6
3
2
1
Drawbar load
You will only achieve optimum driving stability
and decisively increase your safety on the road if
the drawbar load has been properly adjusted for
your combination of base vehicle and the cam-
per being pulled. The drawbar load indicates the
power the camper's drawbar exerts on the car's
clutch.
Rules for the drawbar load:
• Set the correct drawbar load by using, for
example, a drawbar load scale, which is posi-
tioned vertically below the hitch.
• Always check the drawbar load before you
start to drive!
• The specied drawbar load (see handbook
or type plate) and the permissible overall
mass of the base vehicle and the camper may
not be exceeded!
How to adjust the correct drawbar load:
1. Determine the maximum drawbar load of your
base vehicle by checking its documentation,
the type plate or the drawbar plate.
2. Your Fendt camper has a maximum per-
missible drawbar load of 100 kg.
3. Adjust the drawbar load on the camper to the
lower of the two values by loading it careful-
ly. At the same time, try to make full use of
this value.
4. The lower of the two specied values for the
drawbar load, i.e. that of the base vehicle or
the camper, may not be exceeded.
Stowage areas in the camper
- Light objects
j
such as towels and light-
weight laundry.
- Medium-weight objects
k
such as clothing,
laundry and food.
- Heavy objects
l
such as the outer tent,
boat motor or crates of drinks.
If the camper has been tted with a bicycle car-
rier on the drawbar, the increase in the drawbar
load caused by the weight of the bicycles must
be counterbalanced by the rest of the load.
To Next Page
Loading...
Need help?
General