06-3
6.3 Converting the seating arrangement into a bed
In most campers, the seating arrangements can
be converted to beds if required.
Here is some useful information for doing
this:
• Remove the seat and back cushions.
• Release the bolting device for the table frame
or table leg.
• Lower the table frame or place the hinged
table on the prepared strips of the seating
chests.
• If necessary, widen the seating benches.
• Replace the seat and back cushions as
shown in the pictures.
Ensure that the tabletop, seat chests
and/or covers as well as cushions are
well secured so that nothing can fall.
Some camper models do not require
seat and/or back cushions when
converting seating arrangements into
beds.
When converting seating arrange-
ments into beds, do not place the
cushions directly on the tabletop as
this may cause scratches or mildew
due to condensation. We recommend
that you use an absorbent cloth (e.g.
terry cloth or cotton).
To Next Page
Loading...
Need help?
General