Festool CTL SYS Original Instructions

– Carrying storage box with dust extractor:
Carrying strap at storage box [5b]
Before lifting, check the carrying strap for
proper functionality and put T-loc at dust ex
tractor into corresponding position.
Adjust the length of the carrying strap at the
adjusting tab [5c].
7.4 Connecting sleeve
The bypass function of the connecting sleeve
prevents strong suction from sanding machines
and floor nozzles on smooth surfaces.
Open
► Turn the adjusting ring to the "OPEN" posi
tion.
Close
► Turn the adjusting ring to the "CLOSE" posi
tion.
8 Working
CAUTION
Hazardous dust
Damage to the respiratory passage
► Always use a filter bag!
Two cleaning nozzles are stored in the in
side of the dust extractor [6-1].
Observe the following information:
– The dust extractor is a stationary system
and not suitable for pulling at the cable and
hose. Use handle [1-4].
– A static charge may build up if no antistatic
suction hose is used. The user may receive
an electric shock.
When extracting dust that exceeds the
limit value, only extract from one dust
source (power or compressed-air tool).
Observe the following when extracting dust
generated by operating power tools:
Ensure there is adequate ventilation! Observe
regional regulations!
Limit values: Exhaust air max. 50% of the fresh
air volume
Equation: Room volume V
R
x air renewal rate
L
W
Please note the following after the work:
► Switch off the dust extractor and pull out
the mains plug.
► Wind up the mains power cable.
► Empty the dirt trap.
► Place suction hose [1-3] and mains power
cable in storage box.
► Clean inside and outside of dust extractor
by applying vacuum and wipe.
► Place the dust extractor in a dry room inac
cessible to unauthorised users.
9 Service and maintenance
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
► All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festool.com/service
EKAT
1
2
3
5
4
Always use original Festool spare parts. Order
no. at: www.festool.com/service
► Regularly replace the filter bag and clean
the container and seals.
Observe the following information:
– Dust-related inspection (e.g. for filter dam
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!
9.1 Changing the filter bag
► Open dust extractor with T-Loc [6]. Atten
tion: Risk of tilting!
► Changing the filter bag:
▷ Remove filter bag [7].
▷ Insert a filter bag [8].
► Close dust extractor with T-Loc.
English
16

Festool CTL SYS Specifications

General

Input power	1200 W
Airflow	50 l/s
Capacity	4.5 L
Filter surface	5357 cm²
Container capacity (dust)	3.5 L
Product color	Black, Green, White

Weight and Dimensions

Depth	396 mm
Width	296 mm
Height	270 mm
Weight	6900 g