9.2 Changing the filter element [9]
NOTICE
Motor damage
► Never operate the extractor without a filter
element fitted as the motor may become
damaged.
► Open dust extractor with T-Loc [6]. Atten
tion: Risk of tilting!
► Unlock and fold down lever.
► Remove container upwards.
► Remove used filter element and replace
with a new one.
► Dispose of the used filter element in ac
cordance with statutory regulations.
► Clean container and seals.
► Insert container. Fold up and lock lever.
► Close dust extractor with T-Loc.
The order numbers for accessories, filters
and consumables can be found in the
Festool catalogue or on the internet at
www.festool.com.
10 Troubleshooting
Flow noise during dust extraction
Automatic bypass: A valve opens that supplies
the turbine with cooling air:
Cause Blocked filter element, filter bag
full or blocked suction hose
Solution Empty container, replace or clean
filter element, replace filter bag,
check suction hose for blockage
and remove, if necessary
11 Transportation
Observe the following information:
– Before transportation, always close the T-
Loc at the dust extractor or connect to the
storage box.
– For transportation in vehicles, secure the
device against slipping and tilting in ac
cordance with the valid guidelines.
12 Environment
Do not dispose of the device in the
household waste! Recycle devices, ac
cessories and packaging. Observe appli
cable national regulations.
EU only: In accordance with the European Di
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re
cycling.
Information on REACH: www.festool.co.uk/
reach
13 General information
Imported into the UK by
Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain
English
17
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
