Festool CTL SYS Original Instructions

Symbol Meaning
Wear a dust mask.
Tip or advice
Handling instruction
Warning! The machine may contain
hazardous dust!
Climbing prohibited
Do not leave in the rain!
Do not absorb any water or liquids!
Risk of tilting!
UKCA marking: The United Kingdom
Conformity Assessed symbol is a
marking for products being placed on
the market in the United Kingdom. It is
a manufacturers indication that the
product is in conformance with the rel
evant regulations in the UK.
3 Intended use
Dust extractor suitable for
– extracting dust with limit values up to 1
mg/m³ corresponding to dust class L,
– for increased loads during commercial use,
according to IEC/EN 60335-2-69.
Dust extractor not recommended for continu
ous extraction of fine dust, such as cement dust
or filler.
The user is liable for improper or non-in
tended use.
4 Technical data
Dust-extractor
Power consumption 1000 W
Max. electrical outlet module connected load EU
CH, DK, GB
AUS
1200 W
1300 W
1400 W
Max. suction capacity (air), extractor/turbine 108 m³/h / 180 m³/h
Max. vacuum, turbine 200 hPa
Filter surface area 5357 cm²
Suction hose D 27 mm x 3.0 m-AS
Mains power cable length 5.0 m
Sound pressure level as per EN 60704-2-1/uncertainty K 67 dB(A)/3 dB
Vibration value at the cleaning nozzle/instability
< 2.5 m/s
2
/ 1.5 m/s
2
Type of protection IP X0
Container capacity 4,5 l
Dimensions L x W x H CTL SYS with storage box 396 x 296 x 270 mm
only CTL SYS 396 x 296 x 162 mm
Weight CTL SYS with storage box 6.9 kg
5 Parts of the machine
[1-1]
Dust-extractor
[1-2]
Storage box
[1-3]
Extractor hose
[1-4]
Handle
[1-5]
Angle piece
English
14

Festool CTL SYS Specifications

General

Input power	1200 W
Airflow	50 l/s
Capacity	4.5 L
Filter surface	5357 cm²
Container capacity (dust)	3.5 L
Product color	Black, Green, White

Weight and Dimensions

Depth	396 mm
Width	296 mm
Height	270 mm
Weight	6900 g