Notice: iOS Setup Tips
Turn on Bluetooth to allow Vegatouch Mira to
connect to Accessories.
If you do not have Bluetooth turned ON in your iOS settings
you will see this screen. Do not click OK, you must click
SETTINGS. Your Bluetooth Settings page will now appear and
you should turn Bluetooth ON.
Location Services Required
To enable Location Services on your Apple device:
1. Go to settings/Privacy/Location Services.
2. Make sure that Location Services is ON.
3. Scroll down to find your app.
4. Tap the app and select “Always allow access to your location”.
Notice: Android Setup Tips
Allow Vegatouch Mira to access this device’s location.
Mira will need to be allowed access to your location. Click ALLOW when you see this
screen.
To enable Location Services on your Android device:
1. Open your phone’s Settings app.
2. Tap Location/App Permission
-If you don’t see “Location” tap Security & Location/Location.
-If you have a work profile, tap Advanced/Location.
3. Under “Allowed all the time” and “Allowed only while in use” view the apps
that can use your phone’s location, tap it, then choose the location access for
the app.
4. To change the App’s permissions, tap it, then choose the location access for the app.
To Next Page
Loading...
Need help?
General
