Your coach uses two different styles of SSP17 switch panels to
control lighting and other functions. Lights that are dimmable
will have Up/Down arrows next to the icon. Press and
hold these buttons to ramp the brightness up and down.
Each time that a button is pressed, the Operational LED
(Blue on wired switch panels) will illuminate to indicate
that the command has been sent to the touchscreen.
Your Wireless SSP17 switch panel use wireless RF
technology to communicate with the Lyra touchscreen. Please
note that your wireless switch panel will not feature backlit
buttons.
This switch is powered by a 2032 coin cell battery. If you press
a switch panel button and fail to see the Green operational LED
(at the bottom of the switch), you’ll need to change the
battery. Simply use your fingers to pry the switch panel away from the wall-mounted backplate
to access the battery compartment on the back of the switch.
Once you replace the battery, line the switch panel up with the backplate and apply pressure to
snap the switch panel back into place.
To Next Page
Loading...
Need help?
General
