Starting a wash
1 Remove food scraps and load dishes carefully
For more detail, see sections
‘Caring for your dinnerware’
‘Loading’
2 Add detergent
For more detail, see sections
‘Water hardness and dishwashing’
‘Wash programmes and detergent quantities’
‘Adding detergent’
3 Turn power on (also check water is turned on)
For more detail, see section
‘Controls and starting a wash’
4 Check rinse aid level, refill if necessary
For more detail, see section
‘Using rinse aid’
5 Check that nothing obstructs the spray arms, then
close the door firmly
6 Select wash programme
For more detail, see section
‘Controls and starting a wash’
‘Wash programmes and detergent quantities’
7 Start wash OR set Delay start
For more detail, see section
‘Controls and starting a wash’
‘Setting Delay start’
After the wash
8 Open the door slightly and leave ajar to help drying
For more detail, see section
‘After the wash’
9 Once cooled, unload dishes carefully
For more detail, see section
‘After the wash’
!0 Check condition of dishwasher, clean if necessary
CH & CHP models
CK models
To Next Page
Loading...
Need help?
General
