42
FAULT CODES
If the dishwasher malfunctions, it will display a fault code and beep. Check the table
below to see if you can correct the fault yourself before contacting Fisher & Paykel
Customer Care.
If the dishwasher still will not work, or shows any other fault code
1 Press
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
to turn the dishwasher off and wait a few minutes.
2 Press
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
again to turn the dishwasher back on.
If the dishwasher still does not function and/or the problem persists, disconnect the
dishwasher from the power supply, turn the water supply off, then contact Fisher &
Paykel Customer Care with the fault code information.
To Next Page
Loading...
Need help?
General
