20
USER PREFERENCE SETTINGS - CH & CHP MODELS
These allow you to:
Adjust the Rinse aid level.
Turn the Beeps on or off.
To adjust the Rinse Aid level
1 Press
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
to turn the dishwasher on.
2 To enter the User preference settings, press and hold Delay and
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
together until:
The display shows the current Rinse Aid setting (the default is rA6).
CH model: The Heavy indicator will flash and the Normal indicator will be steadily lit.
CHP model: The Auto indicator will flash and the Heavy indicator will be steadily lit.
3 Press Delay to change the Rinse Aid setting in steps between rA1 (minimum dispense)
and rA7 (maximum dispense).
4 To exit the Rinse Aid menu, press
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
FISHER AND PAYKEL P8 DISHWASHER TOPCAP GRAPHICS
DW60CE
To Next Page
Loading...
Need help?
General
