WASH CYCLES AND OPTIONS
You can program your Ecosmart to remember the
wash options you prefer for each wash cycle. For
instance,you may want to set the Regular cycle to cold
wash or set Heavy Duty to include a soak.
TO CUSTOMIZE A CYCLE
1. Press the Power Button.
2. Press selected wash cycle button.Hold down for 4
seconds. You will hear two quick beeps and the wash
cycle light will flash.
3. Select your wash options,(eg cold wash,soak).
4. Press the wash cycle button again to store your
customized cycle.
When you are customizing a wash cycle,you can
shorten or lengthen the agitation time.
•To shorten the agitation time,press ADVANCE to
reduce the number of green lights.
•To increase the agitation time keep pressing
ADVANCE until all the green lights are on.(On
Heavy Duty you can only decrease the wash time)
Note: Unlike the Favorite cycle you cannot
customize a wash cycle to start at the rinse or
spin stage.
Favorite cycle lets you design your own wash cycle.
Favorite can be any wash cycle with any of its wash
options,and it can start from any point in the cycle.
TO SET YOUR FAVORITE CYCLE
1. Press the Power Button.
2. Press the FAVORITE cycle button.Hold down for 4
seconds until you hear two quick beeps and the
Favorite light flashes.
3. Select your favorite cycle (eg Regular or Delicate).
4. Select the wash options (eg soak, time saver). Use
Advance if you want part of a cycle (eg spin only).
5. Press FAVORITE again to store your favorite cycle.
Note:Your Ecosmart will remember your favorite
cycle,or any other cycle that has been customized, even
when unplugged from the wall.It is not possible to
program a delayed start into the Favorite cycle.
CUSTOMIZING THE
WASH CYCLES
10
FAVORITE CYCLE
To Next Page
Loading...
Need help?
General
