16
Stereo Blending
If your instrument has two
signal sources (typically mini-
mic and pickup) and stereo
output, you may route these
signals into separate channels
of the amp and blend them
independently for your own
custom mixes.
1) Plug in a stereo (TRS) instru-
ment cable between your guitar
and the Channel 2, ¼” input.
2) Pickup (Tip) is routed to Channel 2
and Mic (Ring) is routed to Channel 1.
3) Turn on phantom power if mini-mic requires it.
STEREO CABLE
Mic (ring) feeds Channel 1
Pickup (tip) feeds Channel 2
Pickup (tip)
Mic (ring)
Turn on Phantom if
mini-mic requires it.
To Next Page
Loading...
Need help?
General
