7
Front Panel
1. Power
Lights up when the amplifi er power is on. The Power switch is located behind
the amp above the AC power cord terminal.
2. Channel 1 input
Accepts all types of passive or active acoustic pickups.
3. Channel 2, XLR input
Plug in a balanced mic here for vocal or for your instrument. The Loudbox 100
makes an excellent mini-PA or vocal monitor. You may also connect an outboard
preamp with balanced XLR out to this input.
Note: If you attempt to plug in both the Channel 2 XLR and ¼” inputs at the
same time, the XLR shuts off.
4. Phantom power switch
Provides 24V to the XLR input, for a condenser microphone.
Provides 15V to the ring contact of Channel 2’s ¼” input, for instruments with
mini-electret microphones.
Note: Push the Mute switch in before you turn on the phantom power, to avoid a
loud “pop.”
For more information on phantom power, see page 15.
12
35
6 7 8 9 10 11 12 13 14 15 16 17
18 19 204
To Next Page
Loading...
Need help?
General
