EasyManuals Logo
Home>FLIR>Thermal cameras>E86

FLIR E86 User Manual

FLIR E86
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #115 background imageLoading...
Page #115 background image
Pairing Bluetooth devices
21
You can use the camera with the following Bluetooth devices:
METERLiNK devices (FLIR meters).
Bluetooth-enabled headsets.
If supported by your mobile phone, you can also share the phone’s internet connection
with the camera via Bluetooth.
Note The Bluetooth protocol is limited in terms of data transfer and best suited for up-
load of single images. For upload of videos and folders with several images, it is recom-
mended to use Wi-Fi.
Before you can use a Bluetooth device with the camera, you need to pair the devices.
The Bluetooth functionality is managed from the Settings menu. You can also enable/dis-
able Bluetooth on the swipe-down menu. For more information, see section 6.4.4 Swipe-
down menu.
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select
(Settings) and push the navigation pad. This displays the Settings menu.
3. Use the navigation pad to select Connections > Bluetooth.
4. Make sure Bluetooth is enabled by toggling the Bluetooth switch.
Note You also need to ensure that the external Bluetooth device is in visible mode.
On the mobile phone, you must make sure that Bluetooth is enabled, that the phone
is in discovery mode, and that Bluetooth tethering is enabled.
5. Select Available devices and push the navigation pad.
6. Wait until a list of available Bluetooth devices is displayed.
7. When a Bluetooth device is found, select the device to add it, and begin the pairing
procedure. The device is then ready to be used.
Note
You can add several devices.
You can remove a device by selecting the device and then selecting Unpair device.
After adding a METERLiNK device, such as the FLIR MR77 or FLIR DM93, the result
from the meter will be visible in the result table and stored with the images. For more
information, see section 22 Fetching data from external FLIR meters.
After adding a Bluetooth-enabled headset, it is ready to be used for adding voice
annotations.
#T810587; r. AD/90967/90989; en-US
108

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FLIR E86 and is the answer not in the manual?

FLIR E86 Specifications

General IconGeneral
BrandFLIR
ModelE86
CategoryThermal cameras
LanguageEnglish

Related product manuals