Features
153
*
[FV13200( X)05/91] 5. Fold the edges of the vinyl toward the center. Make sure the
edges of the vinyl clear the end cap slots (see Figure 2). Use
masking tape or a rubber band to hold the vinyl on the left
side of the roller tube.
*
[FV13300( X)05/91] 6. While holding the vinyl and roller tube as shown in Figure
2, push the right end cap (marked with an “R”) about 1/4
inch to disengage the clutch.
*
[FV13400( X)05/91] 7. Wind the shade 14 revolutions in the direction shown in
Figure 2. (The wind direction is also marked on the end
cap.)
[FV13500( X)05/94]
10-1/2 pica
art:0021202-A
Figure 1
File:08unfvx.ex
Update:Thu Feb 29 13:56:40 1996
To Next Page
Loading...
Need help?
General
