11. Install front end accessory drive components as outlined. Refer to Section 03-05 for routing and
tension of drive belt.
12. Fill crankcase with the correct viscosity and weight engine oil.
13. CAUTION: This engine has aluminum components and requires a special corrosion-
inhibiting coolant formulation to avoid radiator damage. Refer to Section 03-03 for coolant
specifications.
Fill and bleed cooling system.
14. NOTE: When the battery has been disconnected and reconnected, some abnormal drive
symptoms may occur while the powertrain control module (PCM) (12A650) relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the
strategy.
Connect battery ground cable (14301).
15. Start engine (6007) and check for coolant, oil and exhaust leaks.
file://C:\TSO\tsocache\VDTOM_5368\SVK~us~en~file=SVK31B22.HTM~gen~ref.HTM
To Next Page
Loading...
Need help?
General
