4. Within two seconds of pressing
the washer control, put the key in
the ignition.
5. Continue to press the washer
control until a tone is heard, and
releas the washer control while the
tone is sounding.
A confirmation sequence of tones
will sound. One beep indicates that
the feature is inactive, two beeps
indicate that the feature is active.
HIGH BEAMS
Push forward to activate.
FLASH TO PASS
Pull back to activate and release to
deactivate.
OVERDRIVE CONTROL
Activating overdrive
(Overdrive) is the normal drive
position for the best fuel economy.
Controls and features
35
To Next Page
Loading...
Need help?
General
