and (2) This device must accept
any interference received,
including interference that may
cause undesired operation.
Changes or modifications not
expressly approved by the
party responsible for
compliance could void the
user’s authority to operate the
equipment.
Autolock
This feature automatically locks all
doors when:
• all vehicle doors are closed
• the ignition switch is in the ON
position
• you shift into or through R
(Reverse)
• the brake pedal is released.
Relock
The autolock feature repeats when:
• any door is opened and closed
• the brake pedal is released.
Deactivating/activating the
autolock feature
Before following the procedure,
make sure that the ignition is OFF
and all vehicle doors are closed.
You must complete steps 1-5
within 30 seconds or the
procedure will have to be
repeated. If the procedure needs
to be repeated, you must wait 30
seconds.
1. Turn the ignition key to ON.
Controls and features
44
To Next Page
Loading...
Need help?
General
