Maintenance
and care
212
Replacing
the tires
Replace tires when the wear band
is visible through the tire treads.
When replacing full size
tires, never mix radial,
biasĆbelted, or biasĆtype tires.
Use only the tire sizes that are
listed on the Certification Label.
Make sure that all tires are the
same size, speed rating, and
loadĆcarrying capacity. Use only
the tire combinations
recommended on the label. If you
do not follow these precautions,
your vehicle may not drive
properly and safely.
Make sure that all
replacement tires are of the
same size, type, loadĆcarrying and
tread design (e.g., All Terrain",
etc.), as originally offered by
Ford.
Failure to follow these
precautions may adversely
affect the handling of the vehicle
and make it easier for the driver
to lose control and roll over.
Tires that are larger or smaller than
your vehicle's original tires may
also affect the accuracy of your
speedometer.
To Next Page
Loading...
Need help?
General
