Controls
and features
74
Procedure
to program spare
SecuriLockT
keys
New SecuriLockT keys must have
the correct mechanical key cut for
your vehicle.
Conventional (non SecuriLockT)
keys be programmed to
your vehicle.
The correct type of SecuriLockT
key for your vehicle is identifiable
by the alphanumeric characters
stamped on the key blade. The
SecuriLockT key identification for
your vehicle is: one letter of the
English alphabet followed by the
number 1" (for example, S1" or
I1" on the key blade indicate you
have the correct type of
SecuriLockT key). If the
SecuriLockT key does not have
this information stamped on the
key blade, the key will not operate
your vehicle.
You will need to have two
previously programmed
SecuriLockT keys and the new
unprogrammed SecuriLockT key
readily accessible for timely
implementation of each step in the
procedure. Please read and
understand the entire procedure
before you begin.
To Next Page
Loading...
Need help?
General
