Wireless headphones
Your system is equipped with 2 sets
of wireless headphones. (Two AAA
batteries are needed to operate the
headphones.) Batteries are included.
To install the batteries, remove the
screw at the bottom of the cover.
Then, lightly press down on top, and
slide the cover off.
When replacing the batteries, use
two new batteries (alkaline
recommended) and install them
with the correct orientation as
indicated in the battery housing.
Wireless headphone operation
To operate the headphones:
• Press the ON/OFF button on the
earpiece to turn on the
headphones. A red LED
(indicator light) will illuminate
indicating the headphones are
powered ON. Press ON/OFF again
to turn the headphones off.
• Adjust the headphones to
comfortably fit your head using
the headband adjustment.
• Adjust the volume control to the
desired listening level.
Note: The volume level of the
wireless headphones can only be
2006 Freestyle (219)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
32
To Next Page
Loading...
Need help?
General
