Connecting the jumper cables
1. Connect the positive (+) booster cable to the positive (+) terminal of
the discharged battery.
Note: In the illustrations, lightning bolts are used to designate the
assisting (boosting) battery.
While connecting the positive (+) cable, make sure the ends of
the negative (-) cable are not resting against metal parts of the
vehicles.
2. Connect the other end of the positive (+) cable to the positive (+)
terminal of the assisting battery.
+
–
+
–
+
–
+
–
Roadside emergencies
202
To Next Page
Loading...
Need help?
General
