Temperature control knob
Controls the temperature of the
airflow inside the vehicle. On
heater-only systems, the air cannot
be cooled below the outside
temperature.
Mode selector control
Controls the direction of the airflow
to the inside of the vehicle.
• PANEL-Distributes outside air through the instrument panel registers.
• OFF-Outside air is shut out and the fan will not operate. For short
periods of time only, use this mode to prevent undesirable odors from
entering the vehicle.
• PANEL & FLOOR-Distributes outside air through the instrument panel
registers and the floor ducts.
• FLOOR-Allows for maximum heating. Distributes outside air through
the floor ducts.
• FLOOR & DEF-Distributes outside air through the floor ducts and the
windshield defroster ducts.
• DEF
-Distributes outside air through the windshield defroster
ducts. It can be used to clear ice or fog from the windshield.
Operating tips
• In humid weather conditions, place the climate control system in
DEF before driving. This will reduce fogging on your windshield. Once
the windshield has been cleared, operate the climate control system as
desired.
• To reduce humidity buildup inside the vehicle in cold weather
conditions, do not drive with the climate control system in the OFF
position.
• Ensure that your inside glass is kept clean. Dirty glass is significantly
more difficult to defrost, demist, etc.
COOL WARM
OFF
PANEL
FLOOR
DEF
FLR
& DEF
PANEL &
FLOOR
Controls and features
57
To Next Page
Loading...
Need help?
General
